For over 30 years, ALU-K has been identified with high quality
aluminium systems capable of fulfilling every architectural
requirement, with a wide range of products, which assure thermal
and acoustic insulation as well as environmental exclusion,
ALU-K aims at a coordinated approach to translate your concepts
into high performance structures.
Continuous Support from the technical team at Aluk ensures that
the projects undertaken by us conform to international parameters
for safety and performance.
| • |
Wide Product Range to
suit all architectural applications. |
| • |
High Performance Units
based on Air, Water & Thermal Exclusions. |
| • |
Superior Accessories&
Gaskets – all imported. |
| • |
Basic Design and Engineering
of product is “preventive” in nature–hence
long term problems are eliminated. |
| • |
Fit & Forget Solutions. |
Aluk range of products
| • |
Doors : Swing
Doors, Slide-Fold Doors, Sliding Doors, Hinged Doors |
| • |
Openable Windows
: Fixed, Slide Fold, Horizontal Pivot, Side Hung,
Top Hung, Bottom Hung |
| • |
Curtain walls
: Curtain Wall, Skylights, Polygonal Structures |
| |
|
|
|
Doors |
 |
|
| • |
A 45mm series
coupled with high seal performance gaskets to offer
total exclusion of air / water / dust. |
| • |
Doors can be provided
with infills form 4mm upto 30mm and can also integrate
with access control systems. |
| • |
Exclusive ALU-K
accessories made from premium quality materials
guarantee perfect joints, reliable operation and
secured locking. |
|
|
|
Openable Windows |
| |
 |
| • |
A 45mm Series |
| • |
Dutral Gaskets
for high seal performance |
| • |
Glass thickness
from 4mm to 30 mm can be accommodated |
| • |
Option of square
and round glazing beads |
| • |
Corner connectors
designed to fit the extrusion cavity ensures deflection
free joints |
|
|
 |
|
|
Sliding Windows |
 |
|
| • |
A 70 mm series
with 90° cut for frame and shutters |
| • |
Frame specially
designed for requirement of insect screen |
| • |
Single panel of
upto 70 kg |
| • |
Glass thickness
from 4mm to 18mm |
| • |
Special DUTRAL
glazing gaskets and high density poly-propylene
brush gaskets |
| • |
Die cast metal
rollers with reinforced polyamide wheels and ball
bearings Open Track for easy water drainage |
| • |
Top Water protection
for added water impermeability |
| • |
Open Track for
easy water drainage |
| • |
Top Water protection
for added water impermeability |
| • |
Water Drainage
Covers for both low and high velocity areas |
|
| |
|
 |
|
|
Curtain Walls |
| • |
Curtain Walls
designed with both 50mm and 60mm sight lines |
| • |
Varying section
modulus from 103 cm3 to 834 cm3 allow for increased
resistance to wind loads and greater span possibilities |
| • |
Panel thickness
from 4 mm to 30 mm can be accommodated. |
| • |
For infills >
12mm a special low thermal conductivity spacer is
used between the mullion and pressure plate ; system
conforms to class 2.1 DIN standards.System becomes
thermally broken |
| • |
All screw connections
in the system are of stainless steel with special
synthetic seal washers |
| • |
Grid when assembled
has two level water drainage and special spouts
to direct any water infiltration to the exterior |
| • |
Top hung windows
are integrated with the grid in a manner to allow
for complete planarity of both openable and fixed
panels. |
| • |
A maximum of 15°
opening is possible using stainless steel side arms
and extruded aluminum hinges with steel pins and
anti-friction resin bushing. |
| • |
High performance
Dutral gaskets are used with special extruded corner
joints for enhanced water impermeability
|
| • |
Structure employs
the principle of pressure equalisation |
| • |
Segmentation of
façade in angles of 7.5° to 30° allows
for construction of polygonal structures
|
| • |
Detailing at expansion
joint for enhanced structural stability also caters
for building movements and water impermeability |
|
|
 |
 |
Detailing at expansion
joint for enhanced structural stability also caters
for building movements and water impermeability |
| Grid when assembled
has two level water drainage and special spouts
to direct any water infiltration to the exterior. |
 |
|
|
|
Sky Lights |
| • |
A Skylight System
comprising of aluminium frames with multiple levels
of water barriers spans across the truss and bonds
the glass to the truss. |
|
|
|
Wall Start Flashing
Detail
 |
 |
| |
Transom Joints could
either be structurally glazed or provided with special
cover caps that allow flow of water |
|
|
|
Structural Glazing - AW3S |
| • |
A grid –
unitised system with a split mullion combines the
advantages of a factory finished product with the
convenience of glass replacement |
| • |
Mullion with a
section modulus of 207.38 cm. assures structural
stability in high wind pressures. |
| • |
Seven Stage air
/ water barrier using DUTRAL gaskets |
| • |
Possibility of
using single & double insulated glass as well
as granite / marble / composite panel cladding units |
| • |
Ventilation of
the spandrel panel through machined slots |
| • |
Clamping onto
the structural members done by three dimensional
adjustment clamps allowing for perfect leveling
of the grid. |
| • |
Split mullion
allows for tolerances in the building structure
along the horizontal plane and smooth segmentation
of façade |
| • |
All gaskets are
made using EPDM DUTRAI for better performance, increased
resistance to UV radiation and longer life. |
| • |
Each basic grid
module is storey high, allowing for adjustments
upto 60 mm per storey by means of a three dimensional
variation bracket anchored to the basic structure
of the building. |
| • |
Supported between
Floor Slabs, the system provides superior structural
stability than Cantilevered anchorage. |
| • |
Expansion Joints
are designed to allow and absorb any movements and
thermal expansions without affecting the stability
of the system. Special covers seal the joint from
water infiltration. |
| • |
Special additional
support for dead load of glass |
| • |
Provision for
Blind Panels using a variety of finishes
|
| • |
Large chamber
for pressure – equalization.
|
| • |
Integration of
Top-Hung panels using self balancing side arm support
for shutters of 60 -120 kg and have closure device
using rotating cremone bolt , return rod and stop
pawls |
| • |
Absence of weather
sealant results in the elimination of streaks on
the glass surface and hence reduces need for repeated
maintenance.
|
| • |
Special hook –
on device for clamping of panel to grid with additional
safety spring for modules on the expansion joint
|
| • |
Neat detailing
of terminations at floor , ceiling and assures aesthetic
appeal from the interior as well as the exterior. |
|
|
 |
 |
 |
| |
Special hook-on device
for clamping of panel to grid with additional safety
the expansion joint. |
|
|
|
Structural Glazing - SG60 |
| • |
Semi -Unitised
System with the convenience of glass replacements
and ease of handling. |
| • |
Single Mullion
that has unique method of transom connections that
enable a 100% factory fabricated and assembled product. |
| • |
Four Stage Barriers
for enhanced performance of air and water sealing. |
| • |
Basic principle
of construction allows for two level water drainage. |
| • |
Special Thermo-Plastic
Material placed between the mullion and glazing
panel gives a low-conductivity, thermally insulated
structure classified under 2.1 DIN 4108 |
| • |
Panels are fitted
onto the main structure using special accessories
and SS fasteners resulting in accurate assembly
and convenience in replacements. |
| • |
Panels assembled
with corner connectors to fill the tubular spaces
giving perfectly sealed joints. |
| • |
Specially machined
weeps help to ventilate the edge of the glass as
well as the spandrel area reducing the heat load
on the building. |
| • |
Top Hung Windows
to be integrated in the system using self balancing
stainless steel arms permitting a maximum of 15o
opening. Windows to be provided with multi point
latching and a cremone handle. |
| • |
All gaskets are
made using EPDM DUTRAI for better performance, increased
resistance to UV radiation and longer life. |
| • |
Each basic grid
module is storey high, allowing for adjustments
upto 60 mm per storey by means of a three dimensional
variation bracket anchored to the basic structure
of the building. |
| • |
Expansion Joints
are designed to allow and absorb any movements and
thermal expansions without affecting the stability
of the system. Special covers seal the joint from
water infiltration. |
| • |
All exposed items
components have no visible screws. |
| • |
The system integrates
the finishing of the interior at floor and ceiling
levels and also provides for building up of the
necessary sills and lintels, if required by the
interior scheme. These also act as fire stops between
the floors. |
| • |
System is tested
under UNI standards for Air Permeability, Structural
Stability, Water Infiltration and Wind Resistance
in European Laboratories. |
|
|
|
 |
Wall Start Detail to
create necessary thermal barrier between concrete
and aluminium. |
 |
| Neat
detailing of terminations at floor, ceiling and
assures aesthetic appeal from the interior as well
as the exterior. |
|
|
|
|
